Most PCL printers use port 9100 and regardless of the hardware, a PCL Manufacturer Type and Model, such as *HP4, *HP5SI, *HP4000, etc. Or, create a printer configuration and see if it works. Supported Network Protocols to see if TCP/IP LPR/LPD, Port 9100, IPP, or SNMP is listed. Refer to the printer hardware documentation or visit the printer manufacturer's website to locate the printer's specifications to make the determination if it will work with the IBM i.Įmulation or Printer Languages, or search on PCL. This document is updated on an as needed basis. IBM support does not actively search for information about new or different printers. This document is not updated on a regular basis. N1019698: Printer Model Settings for Host Print Transform (HPT) N1019605: Information on Printers from Various Manufacturers It also indicates whether each printer model is likely to work when printing from the IBM System i products using LPR, PJL, SNMP, IPP, or a PC5250 printer session.įor information on printers from other manufacturers, please refer to the following documents: Press, and then follow the instructions on the printer display.This document contains information on the capabilities that are supported on printer hardware from Lexmark. Note: Make sure to type the correct SSID.Ĭonnect the printer to a wireless network using Wi‑Fi Protected Setup. Note: This menu item shows all broadcast secured or unsecured SSIDs. Setup > Wireless > Wireless Connection Setup > Note: Make sure to turn off the printer, then wait for at least five seconds, and then turn the printer back on.įrom the printer control panel, navigate to:

> Settings > Network/Ports > Active NIC > Auto >.

An Ethernet cable is disconnected from the printer.

For more information, see the instruction sheet that came with the wireless network adapter.

A wireless network adapter is installed in the printer and is working properly.

Connecting the printer using the Wireless Setup Wizard

Lexmark wireless setup utility x7550